Product Description
YB series compact prefabricated substation
33kV prefabricated compact substation designed for 33kV secondary distribution system from high voltage to low voltage. The main function of the compact substation is transforming high voltage from 33kV to be low voltage(415V or 380V), it depends on the electrical transformer inside of the substations.
33kV compact substation structure designed as the compact size which including high voltage switchgear, low voltage switchgear, and the electrical transformer. This specification determined the capacity of the compact substation not too big size, the electrical transformer capacity could not exceed 1600kva.
YB series box type substation, also known as a prefabricated substation, is a factory prefabricated indoor and outdoor compact distribution equipment consisting of high-voltage switchgear, distribution transformers, and low-voltage distribution devices arranged according to a certain wiring scheme. It combines the functions of transformer voltage reduction and low-voltage distribution organically and is installed in a moisture-proof, rust proof, dustproof, rodent proof, fireproof, anti-theft, heat-insulating, fully enclosed, and movable steel structure box. Especially suitable for urban network construction and renovation, suitable for places such as mines, factories, oil and gas fields, and wind power plants. It replaces the original civil engineering distribution room and becomes a new type of complete set of power transformation and distribution equipment.
Structural characteristics
1. This product is composed of a high-voltage distribution device, transformer, and low-voltage distribution shaft connected, divided into three functional compartments, namely the high-voltage compartment, transformer, and low-voltage compartment.The high and low-voltage compartments are fully functional, and the high-voltage side primary power supply system can be arranged into multiple power supply modes such as ring network power supply, terminal power supply, and dual power supply.
-High voltage metering elements can also be installed to meet the needs of high-voltage metering.
-The transformer room can choose S9, SC, and other series of low loss oil immersed transformers or dry-type transformers;
-The low-voltage room can adopt panel or cabinet mounted structures according to user requirements to form the power supply scheme that users need. It has various functions such as power distribution, lighting distribution, reactive power compensation, energy metering, and quantity measurement, meeting the different needs of users and facilitating power supply management and improving power supply quality.
2. The high-pressure chamber has a compact and reasonable structure, and has a comprehensive anti misoperation interlocking function. Transformers can be equipped with tracks for easy entry and exit from the doors on both sides of the transformer room when requested by users. Each room is equipped with automatic lighting devices. In addition, all components selected for high and low voltage rooms are reliable in performance, easy to operate, and ensure safe and reliable product operation and easy maintenance.
3. Adopt two methods: natural ventilation and forced ventilation. The transformer room and high and low voltage rooms have ventilation ducts, and the exhaust fan has a temperature control device that can automatically start and close according to the set temperature, ensuring the normal operation of the transformer.
4. The box structure can prevent rainwater and dirt from entering, and the material is made of colored steel plates, which have anti-corrosion and thermal insulation functions. Having the conditions for long-term outdoor use, ensuring anti-corrosion, waterproof, and dust-proof performance, long service life, and beautiful appearance.
Product Parameters
Item |
Unit |
High voltage electrical equipment |
Transformer |
Low voltage electrical equipment |
Rated volege |
kV |
7.2/12 |
6.0.4,100.4 |
0.4 |
Rated capacity |
kvA |
|
"M"type: 200-1250 |
|
" P "type : 5 0 - 4 0 0 |
Rated curren t |
A |
200-630 |
|
100-3000 |
Rated breaking current |
A |
Load switch 400-630A |
|
15-63 |
AA |
Combined electical equipment is dependent on fuse |
Rated short time withstand current |
kA(s) |
20(2) |
200-400kvA |
15x1 |
(12.5(4) |
400kvA |
30x1 |
Raled peak withstand current |
kA |
31.5/50 |
200-400kvA |
30 |
400kvA |
63 |
Rated closing current |
kA |
31.5/50 |
|
|
Power frequency withstand voltage |
kV |
Phase to ground and to phase:32 /40 |
Oil immersion: 35/5min |
≤ 3 0 0 V ,2 k V |
lsolated fracture :34/48 |
Dry type:28/5min |
300,600V,2.5kV |
Lightning impulse withstand voltage |
kV |
Phase to ground and to phase:60/75 |
75 |
|
lsolated fracture :75/85 |
75 |
|
Noise level |
dB |
|
Oil immersion: <55 |
|
Dry type<65 |
Protection grade |
|
|
IP23D |
|
Outline dimension |
|
Choose different outline dimension according te the capacity and mode of selected transformer |
Environmental Conditions
Altitude: ≤1000m;
Wind speed: ≤34m/s (not much dry 700pa);
Ambient temperature: maximum temperature +40ºC, minimum temperature -35ºC;
Relative humidity: daily average not more than 95%, monthly average not more than 95%;
Seismic: horizontal acceleration not greater than 0.4/S2, vertical acceleration not greater than 0.15m2;
Installation location inclination: not greater than 3°;
Installation environment: installed in places without fire, explosion danger, serious filth, chemical corrosion and violent vibration.
Note: When exceeding the provisions of the above conditions, it can be negotiated with our company.
Outline Drawing
Company Profile
Zhejiang Volcano Electrical Technology Co., Ltd. was founded in 2015, is committed to developing, producing and selling 10-40.5kV medium and high voltage electrical equipment, providing users with comprehensive electrical products and power distribution solutions. With superior production conditions, advanced technology, complete production and testing equipment, we have strict quality management system and advanced testing methods to ensure product quality. The company has passed ISO9000 quality management system certification, and strictly according to the quality management system to manage the production process, to ensure product quality.
FAQ
1. Are you a manufacturer or a trader?
VOLCANO is a leading manufacturer specializing in 10-40.5kV switchgear which is located in Zhejiang Province, China.
2.What are your main markets?
Our main markets are in both domestic and overseas including Southeast Asia, Middle East, South America, Africa, etc.
3. What are your delivery and after-sales service?
Delivery depends on the order quantity, usually it takes 1 month for container orders. There are no problems for us to deliver 20 containers (20 feet or 40 feet) per month. About customer service, we will reply to customer's questions within 24 hours and provide full technical support for our products in time.
4. What is your product warranty?
Firstly, our switchgear and power equipment have quality certificates such as CCC, ISO9001, CE, Rohs, CB, TUV, Kema certificates for their electrical parts and accessories. Secondly, we offer a 1-year warranty, during which we provide free repair, maintenance and technical support. Of course, for some switchgear and power equipment, their service life is more than 20 years.
5. Do you accept OEM and ODM?
Yes, our R&D team has the latest technology and can develop and produce products according to customers' drawings and brands
6.What are your payment terms?
A.100% T/T in advance.
B. Irrevocable Demand Letter of Credit for orders over 200,000$.
C. For long-standing business partners, other special terms and conditions can be negotiated.
D. Other than T/T, we also accept Western Union, moneygram, paypal etc.
7.What should I do if I want to visit the factory?
Our company is located in Yueqing City, Zhejiang Province, China. The factory is about 35 minutes drive from Wenzhou Airport and 30 minutes drive from Yueqing High Speed Railway Station. It takes about 1 hour by airplane from Shanghai International Airport.
Well, it's available if you need an invitation letter to come to China.
------------------------------------ZHEJIANG VOLCANO ELECTRICAL TECHNOLOGY CO.,LTD-------------------------------------------------------------------